Travertine Sealing in Arlington, FL

Most driveways around Arlington are concrete or brick pavers. Travertine is a calcium-based natural stone, and the Duval County travertine company that publishes a price guide warns that acidic products can etch it. Unilock, a paver maker, calls the stone acid-sensitive and points to a high-alkaline cleaner instead. A mistake with the wrong cleaner can leave a permanent dull mark, so ask who is handling the stone before you book. To talk it through, call (904) 944-6930.

Travertine also has natural holes and a soft surface that drink in water. That is why one company lists hard water minerals, soap residue and sun among the causes of dull, discolored stone. Sealing is how a contractor slows all of that. Pavers get the same idea in a different product. To compare the two on your property, ask for your free estimate.

Sources spread wide here, which tells you the answer depends on your deck. MSI says one to two years for outdoor travertine. Outercle gives one to two years for heavy pool use, two to three for higher grade sealers and three to five for lighter use. The Duval County travertine company says one to five years overall and says pool decks fall at the short end. To set a schedule for yours, call (904) 944-6930.

Check once a year instead of waiting for color to fade. Outercle describes the water bead test, where a drop that soaks into the stone instead of beading means the sealer is thin. Splash a little on the deck after a dry week and watch it. If it soaks in, ask for your free estimate.

Water that never fully leaves is the usual cause. The Duval County travertine company says humidity and regular summer storms keep outdoor stone in persistent moisture, and that patios near the river and the creeks collect buildup over time. A Duval County pressure washing company adds that moisture gathers on north and east sides of a home and that oak pollen coats surfaces from March through May. A sealed surface sheds more of that and rinses easier. To see how a shaded corner is doing, call (904) 944-6930.

Time of year matters for the sealing process too. The same pressure washing company names fall as the drier season, and Unilock wants 24 to 48 hours of clear skies and surfaces between 50 and 90 degrees before a sealer goes down. Sprinklers have to stay off while it cures. To pick a settled week, ask for your free estimate.

A contractor works across Arlington and the places linked below, which run across Duval County and the counties beside it. Arlington covers about 64 square miles, so the ZIP codes 32277, 32211 and 32225 are all inside the service area. If your street is not listed, call (904) 944-6930.

Many homes here date from the post-war boom. The Jaxson calls Arlington the first major post-war suburb built for the automobile and the part of the city that grew most in the 1950s and 1960s, after the Mathews Bridge opened in 1953. Wikipedia credits architects Robert C. Broward, Taylor Hardwick and William Morgan with mid-century homes in the neighborhood. A house that old has usually had its deck or patio redone at some point, so ask what stone it is. To have a contractor check, call (904) 944-6930.

If the stone is already stained or etched, sealing alone will not erase it. Outercle says to clear stains before a coat and never seal over them. A contractor can tell during the visit whether the stone needs cleaning, a coat, or both. To book that visit, ask for your free estimate.