Bring worn Arlington pavers back before replacing them
Paver Restoration and Resealing in Arlington, FL
Restore faded, shifting pavers with cleaning, repair and a fresh coat, starting with a free estimate at (904) 944-6930.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
How soon can an Arlington contractor restore my pavers?
A local contractor restores and reseals pavers across Arlington, FL, and a reply reaches you inside 1 business day, usually much sooner. The free estimate says whether you need a coat, a repair or both, and you choose what happens next. To start, call (904) 944-6930.
Restoration fits pavers whose trouble goes beyond surface dirt. Think of the drive with a dip near the garage, a gray film over the faded color and sand gone from half the seams. The work cleans, repairs, refills and reseals in the right order, so the surface looks like one piece again. To describe the problem to a contractor, ask for your free estimate.
Does my Arlington driveway need restoring or just a wash?
Ask three questions. Do the pavers rock or sit lower in one spot? Are the joints empty? Is the old sealer peeling or cloudy? Repair and Seal Pavers describes shifting, cracking and unevenness from weather and ground movement, and a Duval County exterior cleaning company says empty joints or failed sealer turn the job into a two day restoration. A yes to any of them points to restoration. To have a contractor decide, call (904) 944-6930.
A wash alone suits pavers that are sound but dirty. Sealing alone suits clean pavers with color left. Restoration covers the middle, where both the look and the structure need help. If you are unsure which category you are in, a short visit sorts it out. To book one, ask for your free estimate.
What is the paver restoration process, in order?
Repair and Seal Pavers says local providers typically clean, repair and then apply a sealant. The Duval County exterior cleaning company adds joint sand and a dry surface before the coat. Five steps cover most jobs. To see how they would apply to your pavers, call (904) 944-6930.
1. Walk it and mark it
The contractor looks for low spots, rocking pavers, empty joints and old sealer that is peeling or cloudy, then says which of those apply to your job.
2. Clean the surface
Repair and Seal Pavers lists cleaning first on its Duval County page, because sealer holds whatever sits under it.
3. Strip what has failed
A Duval County exterior cleaning company says failed sealer is stripped first, not coated over.
4. Fix what moved
Damaged pavers are replaced and uneven sections are re-leveled, which is the repair step that Repair and Seal Pavers puts between cleaning and sealing.
5. Refill and seal
Joint sand goes back in once everything is dry, and the coat goes on in one session. Unilock asks for 24 to 48 hours of clear skies around the job.
Why do pavers in Arlington shift, sink and lose their sand?
Repair and Seal Pavers blames weather, ground movement, settling and heavy traffic. In Arlington, add the summer storms. A Duval County exterior cleaning company says afternoon storms wash sand out of joints, and empty joints bring the weeds back after sealing. Sand that leaves lets edges loosen, which is how a flat drive turns bumpy. To point out the soft spots on yours, ask for your free estimate.
Western Interlock, a paver company, notes that even a surface wash washes out some joint sand, so the joints get topped off after the pavers dry. That small step keeps the surface locked together. Ask whether sand is in your quote when you call (904) 944-6930.
Can failed sealer be coated over instead of stripped?
It should not be. The Duval County exterior cleaning company says failed sealer gets stripped first, not coated over, and names sealing over dirt or wet pavers as a common reason jobs fail. A new coat on a bad one tends to cloud or peel the same way. Ask the contractor how old coats are handled before you compare prices. To ask yours, call (904) 944-6930.
Unilock adds timing rules that apply after stripping and washing: pavers can be dry in a few hours in warm sun or need about 24 hours in cool shade, followed by 24 to 48 hours of clear skies, with sprinklers off while the coat sets. Surface temperatures between 50 and 90 degrees work, and 75 is the sweet spot. To find a window in the forecast, ask for your free estimate.
What does paver restoration cost in Arlington?
Restoration has no single published price, so the numbers come in pieces. One Duval County page lists $250 to $600 for smaller repairs plus sealing and $1,000 or more for larger sealing projects, as general starting points. Another publishes $1.75 to $3.25 per square foot for the whole clean, sand and seal. To get a price on your own pavers, call (904) 944-6930.
Compare that with replacement, listed at $4,000 to $8,000 or higher. A restoration that costs a fraction of that and keeps the pavers you have is usually worth pricing first. Ask each contractor to list the repairs, the stripping and the sand separately. To get such a quote, ask for your free estimate.
| Published piece of the job | Published figure | Source |
|---|---|---|
| Smaller repairs and sealing | $250 to $600 | Repair and Seal Pavers, general starting point |
| Sealing a standard driveway or patio | $300 to $700 | Repair and Seal Pavers, general starting point |
| Larger sealing projects | $1,000 or more | Repair and Seal Pavers, general starting point |
| Whole clean, sand and seal, per square foot | $1.75 to $3.25 | A Duval County pressure washing company |
| That rate on a 500 sq ft walk and patio | $875 to $1,625 | Math on the line above |
| That rate on a 900 sq ft driveway | $1,575 to $2,925 | Math on the line above |
| That rate on a 1,400 sq ft drive and pool deck | $2,450 to $4,550 | Math on the line above |
| Full replacement, for comparison | $4,000 to $8,000 or higher | Repair and Seal Pavers, general starting point |
No published page gives one price for restoration as a package, so the table lists the pieces that are published: repairs, sealing, the whole-job paver rate and replacement for comparison. Stripping failed sealer and replacing sunken pavers come on top, and none of the pages read lists a rate for either. Your contractor prices them after seeing the surface.
Which season is easiest on a paver restoration in Arlington?
A dry stretch matters more than a month on the calendar. The Duval County exterior cleaning company names fall as the drier season, and Unilock wants clear skies on both sides of the coat. Oak pollen coats surfaces from March through May, which makes spring cleaning a short-lived result. To choose a date that works with the weather, call (904) 944-6930.
Which Arlington neighborhoods and nearby places get restoration estimates?
Arlington stretches east and south of the river and west of the Intracoastal Waterway, and a contractor serves all of it plus the places linked below. Houses that were part of the post-war growth after the Mathews Bridge opened in 1953 now have pavers of every age. For an address not on the list, ask for your free estimate.
- Arlington Hills
- Southside
- Brentwood
- San Marco
- Fort Caroline
- Sandalwood
- Royal Terrace
- Panama Park
- San Jose
- San Pablo
- Riverside
- Paxon
- Beauclerc
- Cedar Hills
- Atlantic Beach
- Oceanway
- Highlands
- Jacksonville Beach
- Baymeadows
- Mandarin
- Argyle Forest
- Ponte Vedra Beach
- Bellair-Meadowbrook Terrace
- Palm Valley
- Dinsmore
- Whitehouse
- Fruit Cove
- Lakeside
- Fleming Island
Is restoring pavers worth it for homes built decades ago?
Usually, if the base is still sound. The Jaxson describes Arlington as a post-war suburb built around the car, with growth in the 1950s and 1960s, so long driveways are common. A driveway of that size costs far less to restore than to rip out, according to the published replacement range. A contractor can check whether the base needs more than sand. To book a look, call (904) 944-6930.
Pavers added in a later remodel, around a pool or at a front entry, are the ones most likely to need only cleaning and a fresh coat. Describe the age of your house when you ask for your free estimate.
What will a contractor tell me about my Arlington pavers at the free visit?
Expect a verdict on three things: how sound the pavers and base are, how much of the old sealer is left and how much sand the joints need. Repair and Seal Pavers lists cleaning, repair and sealing as the usual order, so the visit tells you which of the three your Arlington property needs. Ask for the answer in writing. To book the visit, call (904) 944-6930.
Photos help. Send a few of the worst spots with your street name when you ask for your free estimate. A contractor who has seen a long, oak-shaded drive in Arlington before can often say what the visit will find.
Pavers and base
Rocking, sunken or cracked pavers get marked for repair or replacement.
Old sealer
Cloudy or peeling coats are flagged for stripping before a new coat.
Joint sand
Empty or low joints are measured so enough sand is brought for the refill.
Why restore pavers in Arlington instead of replacing them?
Cost is the plain reason. Repair and Seal Pavers lists full replacement at $4,000 to $8,000 or higher, while sealing a standard driveway or patio starts at $300 to $700. If the pavers are sound, a clean, re-sand and seal costs a fraction of a new surface and keeps your pattern and edging. Arlington driveways tend to be long, which makes that gap larger. To weigh the two on your own drive, call (904) 944-6930.
Replacement still makes sense when the base has failed across a wide area. A contractor can tell you which side your Arlington pavers fall on after one look. To find out, ask for your free estimate.
How do restored pavers look at Arlington homes?
Questions Arlington homeowners ask about paver restoration
Is it good to seal pavers in Florida?
Yes for most surfaces, with the caution that it is a repeat job. Humid weather and summer storms feed algae and empty the joints, and a sealed surface rinses cleaner. Plan on a fresh coat every two to three years, the interval a Duval County pressure washing company gives.
What is the average cost to seal pavers in Florida?
Duval County companies publish $1.75 to $3.25 per square foot to clean, sand and seal. Run that over a 900 square foot drive and the total lands near $1,575 to $2,925. Another company lists $300 to $700 for sealing a standard driveway or patio as a starting point.
Which sealer is best for Florida pavers?
It depends on the surface and what you want it to look like. Unilock says water-based sealers clean up easier and solvent-based ones are a little more durable but need perfectly dry pavers. Have the contractor name the product and give the reason for choosing it.
Do I need a license to install pavers in Florida?
The state's Department of Business and Professional Regulation lists paving among trades that do not need a state license, and its tip sheet tells homeowners to check with the local building department. Restoration is repair and sealing of pavers already in place. Ask a contractor for references and a written quote.
Can pavers be restored without replacing them?
Often, yes. Repair and Seal Pavers describes replacing damaged pavers, re-leveling uneven sections and then sealing, which keeps most of the surface in place. Replacement is the comparison point, listed at $4,000 to $8,000 or higher.
How long does a paver restoration take?
A Duval County exterior cleaning company says it is a two day restoration, not a same-day spray, when joints are empty or the sealer has failed. A plain wash and coat on sound pavers is shorter. Drying and weather add time.
Why did my sealer turn cloudy or peel?
The cause is usually sealing over dirt, over damp pavers or too soon after a wash. The Duval County exterior cleaning company calls sealing over dirt or wet pavers a common reason jobs fail, and Unilock wants a few hours to 24 hours of drying after washing.
What makes pavers sink or shift?
Repair and Seal Pavers lists weather, ground movement, settling and heavy traffic. Sand that washes out of the joints lets pavers move. Sealer cannot lift a low paver, so those get fixed first.
Do I have to wait before restoring new pavers?
If they are new, yes. Unilock says to wait until white efflorescence is gone, usually two to three months and sometimes a year, and its FAQ gives 60 to 90 days for brand-new pavers.
Want your Arlington pavers looking cared for again?
Call or use the form for a free restoration estimate, and expect an answer within 1 business day, usually much sooner.
Free, no obligation